The Romans may have mastered the use of concrete over 2,000 years ago (just take a look at the Pantheon in Rome), but that doesn’t mean it’s the same time of material it was back then. Concrete has always combined an aggregate with a hydraulic binder to form a strong and durable substance, but concrete has come a long way over the past 2,000 years. Today, the industry is still evolving and innovating.
Today’s modern concrete is most commonly made with Portland cement, high-quality quarried aggregate, and innovative products and additives to make it more durable. Concrete is one of the most widely used building products in the world because of its ability to be made locally, its cost-effectiveness, and its strength and durability. Because concrete has been around for so long, it might be difficult to imagine that such a well-established material could be improved upon, but it has. New concrete products and manufacturing methods are enhancing concrete’s performance to tackle modern challenges.
In this post, we explore the different types of concrete that have developed over the past few years through various innovations.
Bendable concrete, or engineered cementitious composite (ECC), is a type of concrete with increased ductility, or ability to undergo extreme deformation before cracking or breaking, when compared to traditional concrete.
Victor C. Li of the University of Michigan, where ECC was first researched and invented, states that bendable concrete “can deform up to 3 to 5% tension before it fails, which gives it 300 to 500 times more tensile strain capacity than normal concrete.”
This ability to tolerate tensile strain makes bendable concrete an exciting development in the construction and maintenance of infrastructure where concrete is subject to harsh weather and extreme loads.
By dispersing tiny fibers throughout the concrete bendable concrete mimics nacre, a substance that coats the inside of incredibly strong abalone shells. Nacre is both hard and flexible, and held together by polymers that shift under stress rather than breaking.
Its ability to withstand heavy loads is only part of bendable concrete appeal.
Bendable concrete:
Because of its ability to tolerate tensile strain and its extreme ductility, bendable concrete has a variety of potential applications:
These uses suggest that bendable concrete would also be useful in underground construction and water infrastructure.
As of now, bendable concrete is still relatively new and not widely used.
Design professionals should be aware of this product and its potential, so they don’t overlook an opportunity to utilize it in a structure that requires the ability to withstand considerable tensile strain.
A type of bendable concrete, UHPC incorporates fibers into the concrete mixture in order to improve strength and ductility along with a host of other benefits.
The manufacturer that began using UHPC states that they use “high carbon metallic fibers, stainless fibers, poly-vinyl alcohol (PVA) fibers or glass fibers” to increase the concrete’s ability to withstand tensile loads and deformation.
UHPC is less porous than conventional concrete which makes it more resistant to chlorides, acids, and sulfates. This concrete also has self-cleaning properties and has been thoroughly researched and commercialized.
One of the most notable uses of UHPC is the Perez Art Museum in downtown Miami. One of the biggest challenges around construction of this house of modern and contemporary art is its location; built on Biscayne Bay, the museum is subject to sea air and salt. It is also at risk for tropical storms and hurricanes. An UHPC was used to produce roughly 100 16-foot-long mullions to support the world’s largest impact resistant window at the time of its construction in 2013.
This might sound like something out of the Jetsons or science fiction, but self-cleaning concrete has already made its way on to the market.
Self-cleaning concrete doesn’t just clean itself, it cleans the air around it of harmful pollutants.
This type of concrete was first used for the curved panels on the Jubilee church (also known as the Dives in Misericordia Church) in Rome. The church used the photocatalytic cement panels for its stylistic shells. These shells were made to represent the Holy Trinity and, given their significance, it was important they remain in pristine condition.
It was only natural that self-cleaning, photocatalytic concrete was used to ensure that the shells would not accumulate stains due to smog. Completed in 2003, the photocatalytic shells have notably remained clean and white, performing constant self-maintenance.
Self-cleaning concrete is made with titanium dioxide (TiO2). TiO2 breaks down harmful pollutants in the air due to a reaction that occurs when the TiO2 is added to the cement during its production.
The cement breaks down organic and inorganic pollutants. It is intended to be used for projects in urban centers where air pollution and poor air quality are most pronounced.
An example of how TiO2 cements break down pollutants can be seen in its conversion of nitrogen dioxide (NO2), a harmful compound mostly produced by fuels in cars and trucks. NO2 causes:
The reaction with sunlight produces hydroxyl radicals which react with NO2 to produce NO3, which is dissolved by water after reacting with the cement surface. Research data from a TiO2 cement manufacturer in the U.S. indicates that “up to 50% of these atmospheric pollutants could be reduced in some cities if only 15% of the buildings and roads were resurfaced with a TiO2 cement.”
Graphene concrete is reinforced by a single layer of carbon atoms tightly bound in a hexagonal honeycomb lattice. It is made by suspending flakes of graphene in water, then mixing that water with traditional concrete ingredients such as cement and aggregate. Layers of graphene stacked on top of each other form graphite, a naturally occurring crystalline form of carbon most used in pencils and lubricants. The layers of graphene in graphite can be separated into sheets only one atom thick.
Graphene is the thinnest compound known to man, the lightest known material and the strongest compound discovered — over 100 times stronger than steel.
Graphene concrete is an accessible and affordable concrete option:
According to “Ultrahigh Performance Nanoengineered Graphene–Concrete Composites for Multifunctional Applications,” published in Advanced Functional Materials, graphene concrete impressively shows a “146% increase in compressive strength as compared to regular concrete, a 79.5% in flexural strength, and a decrease in water permeability of almost 400%.''
The key to high-performance concretes is in the materials used to make them. Supplementary Cementitious Materials (SCMs), the innovative materials that give modern concrete their strength and durability, include fly ash, slag cement and silica fume. These materials are actually derived from waste and are byproducts of the manufacturing process that would end up in landfills if not used in concrete.
When these materials combine with Portland cement, they react with existing chemicals to create an even stronger material.
As the population grows, the demand for concrete will continue to grow. And as more and more environmental issues arise and the public becomes more concerned with sustainability and decreasing climate change, innovations in the buildings we use are crucial. Solutions like decreasing CO2 emissions and decreasing the carbon footprints of buildings are being explored by the use of innovative concrete. Additional concrete innovations include:
The concrete industry has been evolving for thousands of years. Innovations in concrete technology will continue to lead to more sustainable products that will last longer, cut back on emissions, and use more naturally occurring elements. A combination of traditional materials and advanced technologies will help meet the physical and environmental demands of new structures in the future.
Thank you to the NRMCA for providing the information in this blog. To learn more about the role concrete plays in a sustainable future, visit Build With Strength.